How to install Cololight Apps:
1) Download Cololight Light Apps (refer to Figure 1)
Figure 1
2) Open the apps and create account
3) Select the model accordingly to your products.
a) Cololight > Cololight Pro (refer to Figure 3A)
b) Cololight Strip > LS167S6 (refer to Figure 3B)
Figure 3 Figure 3A Figure 3B
4) Cololight Pro configuration:
Step 1: After selecting Cololight Pro from (Figure 3a) follows the step below (refer to Figure 4A and 4B)
Figure 4A Figure 4B
Step 2: After following the step for Figure 4A and 4B, you should be able to see your Cololight device ( Refer to figure 4C.
Step 3: Connect your WiFi network, please configure with 2.4Ghz WiFi, 5Ghz WiFi is not supported.
(refer to figure 4D)
Figure 4C Figure 4D
Step 4: Once WiFi is selected, it should start pairing with the devices.
(Note that is might take up to 30 Second for this pairing)
(Refer to Figure 4E)
Step 5: Press 'Next' and Enter Device name and you will be able to configure the color for your Cololight Pro! (Refer to Figure 4F)
Figure 4E Figure 4F
5) Cololight Strip configuration:
Step 1: After selecting Cololight strip from (Figure 3B) follow the step below (refer to Figure 5A)
Step 2: Connect WiFi with your Cololight Device. (refer to Figure 5B)
(Note that you might need to enable apps permission to proceed)
Step 3: Connect your WiFi network, please configure with 2.4Ghz WiFi, 5Ghz WiFi is not supported.
(refer to figure 4D)
Figure 5A Figure 5B
Step 4: Once WiFi is selected, it should start pairing with the devices.
(Note that is might take up to 30 Second for this pairing)
(Refer to Figure 4E)
Step 5: Press 'Next' and Enter Device name and you will be able to configure the color for your Cololight Strip! (Refer to Figure 4F)
Figure 5C Figure 5D