Cololight Pro and Cololight Strip Apps Installation Guide (Android)

How to install Cololight Apps:

1) Download Cololight Light Apps (refer to Figure 1)

mceclip1.png
                                     Figure 1

2) Open the apps and create account


3) Select the model accordingly to your products. 
a) Cololight > Cololight Pro (refer to Figure 3A)
b) Cololight Strip > LS167S6 (refer to Figure 3B)
WhatsApp_Image_2020-09-11_at_2.19.16_PM__12_.jpegWhatsApp_Image_2020-09-11_at_2.19.16_PM__11_.jpegWhatsApp_Image_2020-09-11_at_2.19.16_PM__10_.jpeg
                         Figure 3                                   Figure 3A                                            Figure 3B   


4) Cololight Pro configuration:
 

Step 1: After selecting Cololight Pro from (Figure 3a) follows the step below (refer to Figure 4A and 4B)


WhatsApp_Image_2020-09-11_at_2.19.16_PM__9_.jpegWhatsApp_Image_2020-09-11_at_2.19.16_PM__7_.jpeg
                                 Figure 4A                                                                     Figure 4B


Step 2: After following the step for Figure 4A and 4B, you should be able to see your Cololight device ( Refer to figure 4C.


Step 3: Connect your WiFi network, please configure with 2.4Ghz WiFi, 5Ghz WiFi is not supported.
(refer to figure 4D)


WhatsApp_Image_2020-09-11_at_2.19.16_PM__6_.jpegWhatsApp_Image_2020-09-11_at_2.19.16_PM__5_.jpeg
                                 Figure 4C                                                                      Figure 4D  


Step 4: Once WiFi is selected, it should start pairing with the devices.
(Note that is might take up to 30 Second for this pairing) 
(Refer to Figure 4E)


Step 5: Press 'Next' and Enter Device name and you will be able to configure the color for your Cololight Pro! (Refer to Figure 4F)


 WhatsApp_Image_2020-09-11_at_2.19.16_PM__4_.jpegWhatsApp_Image_2020-09-11_at_2.19.16_PM__3_.jpeg
                               Figure 4E                                                                      Figure 4F  





5) Cololight Strip configuration:


Step 1: After selecting Cololight strip from (Figure 3B) follow the step below (refer to Figure 5A)


Step 2: Connect WiFi with your Cololight Device. (refer to Figure 5B) 
(Note that you might need to enable apps permission to proceed)


Step 3: Connect your WiFi network, please configure with 2.4Ghz WiFi, 5Ghz WiFi is not supported.
(refer to figure 4D)

WhatsApp_Image_2020-09-11_at_2.19.16_PM__8_.jpegWhatsApp_Image_2020-09-11_at_2.19.16_PM__2_.jpeg
                             Figure 5A                                                                     Figure 5B  



Step 4: Once WiFi is selected, it should start pairing with the devices.
(Note that is might take up to 30 Second for this pairing) 
(Refer to Figure 4E)


Step 5: Press 'Next' and Enter Device name and you will be able to configure the color for your Cololight Strip! (Refer to Figure 4F)


WhatsApp_Image_2020-09-11_at_2.19.16_PM__1_.jpegWhatsApp_Image_2020-09-11_at_2.19.16_PM.jpeg                             Figure 5C                                                                     Figure 5D 

 

 

Was this article helpful?
0 out of 0 found this helpful