The Pokémon Collection by Omnidesk comes with a controller that comes with more added features based on our flagship Pro 2020.
1. Timer
You can a timer that counts down from 30, 40, 50 minutes.
- Long press the Poké Ball button (M) to access the settings menu.
- Cycle to 1/6, Timer (Bell logo), with our Up/Down button.
- Press (M) to enter.
- Select your preferred time (30, 40, 50 minutes) with our Up/Down button.
- Press (M) to confirm the selection.
- Once set, you can view the countdown on the desk’s display.
2. Minimum/Maximum Height
You can set the minimum and maximum height (between 63.8-127cm) for your desk.
- Long press the Poké Ball button (M) to access the settings menu
- Cycle to 2/6, Min/Max height (Arrow logo), with our Up/Down button
- Press (M) to enter
- Select the Min OR Max setting
- Press (M) to confirm
3. Lock Mode
You can lock the desk to a specific height and prevent adjustments to it.
- Long press the Poké Ball button (M) to access the settings menu
- Cycle to 3/6, Lock Mode (Lock logo), with our Up/Down button
- Press (M) to enter
- Select the Lock icon, Press (M) to enter Lock Mode
- Adjust the desired height
- Wait for 5-8 seconds for the control box to register the data.
- The display will show a Lock icon, the desk is now locked at that height.
To Unlock:
- Follow the sequence to unlock the desk (press each button left to right)
- You can now set the new height you wish to lock your desk at
- To Exit the Lock Mode: Go to the Lock setting page and select the Unlock icon
- Press (M) to confirm the selection
4. Vibration Alert
You can set the desk to vibrate after the above-mentioned timers have counted down. Choose between a pulsing or a single long vibration.
- Long press the Poké Ball button (M) to access the settings menu
- Cycle to 4/6, Vibration Alert (Vibrate logo), with our Up/Down button
- Press (M) to enter
-Select the Lock icon, Press (M) to enter Vibration alert mode
- Select the short OR long pulse mode
- Press (M) to confirm
*The vibration alert would only work if the timer is in use.
5. Backlight
You can customise the backlight on the controller.
- Long press the Poké Ball button (M) to access the settings menu
- Cycle to 5/6, Backlight (Roulette logo), with our Up/Down button
- Press (M) to enter
-Select the Lock icon, Press (M) to enter Backlight mode
-Cycle with the Up/Down button to select the color of the backlight of your choice.
(Blue, Green, Red, Purple, Orange, White)
- Press (M) to confirm the selection